Kersia – GoodBeer Solutions https://goodbeer.solutions/en/ We craft with you Mon, 03 Feb 2025 14:03:09 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://goodbeer.solutions/wp-content/uploads/2024/07/cropped-favicon-32x32.png Kersia – GoodBeer Solutions https://goodbeer.solutions/en/ 32 32 DEPTACID ONE by Kersia Descaling acid agent https://goodbeer.solutions/en/product/deptacid-one-descaling-agent-kersia/ Thu, 07 Nov 2024 14:19:44 +0000 https://goodbeer.solutions/?post_type=product&p=3138 DEPTACID ONE
DESCALING ACID DETERGENT IN SINGLE PHASE APPLICATION FOR CIRCUITS AND TUNNELS
Physico-chemical characteristics: Appearance Clear liquid Colour Colourless Odour Pungent Pure pH 0.75±0.2 pH value at 10g/l 1.5±0.3 Mass density 1.159±0.01 g/cm³ Freezing point -15 °C Boiling point > 100 °C Solubility in water Soluble in water in all proportions Environmental criteria : chemical oxygen demand (COD) 20 grams of dioxygen per kilogram Nitrogen 6.1 % Phosphorus < 0.1 % Properties : Highly descaling properties Good organic matters removal Suitable for single-phase application Decreases the frequency of use of alkaline Non-foaming Application : Cleaning of CIP systems and tunnels In most cases, it eliminates the alkaline detergent step. The product advantage : Water (+++) / Time (+++) Instructions: Concentration : 0,8 - 3 % Temperature: 20-95 °C Contact time : > 5 mn Standard pattern for use: Rinsing with water Apply DEPTACID ONE by circulation. Final rinsing with drinking water]]> Physico-chemical characteristics:
Appearance Clear liquid
Colour Colourless
Odour Pungent
Pure pH 0.75±0.2
pH value at 10g/l 1.5±0.3
Mass density 1.159±0.01 g/cm³
Freezing point -15 °C
Boiling point > 100 °C
Solubility in water Soluble in water in all proportions
Environmental criteria :
chemical oxygen demand (COD) 20 grams of dioxygen per kilogram
Nitrogen 6.1 %
Phosphorus < 0.1 %
Properties :
Highly descaling properties
Good organic matters removal
Suitable for single-phase application
Decreases the frequency of use of alkaline
Non-foaming
Application :
Cleaning of CIP systems and tunnels
In most cases, it eliminates the alkaline detergent step.
The product advantage : Water (+++) / Time (+++)
Instructions:
Concentration : 0,8 – 3 %
Temperature: 20-95 °C
Contact time : > 5 mn
Standard pattern for use:
Rinsing with water
Apply DEPTACID ONE by circulation.
Final rinsing with drinking water

 

]]> DEPTIL HDS sanitizing contact desinfectant Kersia brewery hygiene https://goodbeer.solutions/en/product/deptil-hds/ Mon, 29 Jan 2024 09:54:28 +0000 https://goodbeer.solutions/?post_type=product&p=1259
  • Without rinsing
  • For dry disinfection 
  • Ready-to-use
  • Non corrosive to stainless steel and plastic materials
    • ]]>      

    Rapid action disinfection, spraying or soaking

    DEPTIL HDS is a bactericidal, yeasticidal, and fungicidal disinfectant. Clean and rinse materials and surfaces beforehand. Apply DEPTIL HDS by spraying or soaking. Concentration: undiluted. Minimum contact time: 2 minutes for bactericidal and yeasticidal activity, 5 minutes for fungicidal activity. Temperature: room temperature. Allow to dry for at least 5 minutes. Regularly wash the application equipment. Meets EN 13697 standard for bacteria under clean conditions. The concentration(s) indicated in this application method represent the recommended concentration(s).

    ]]>         “DEPTIL PA 5” peracetic acid Kersia brewery hygiene https://goodbeer.solutions/en/product/deptil-pa-5/ Mon, 29 Jan 2024 09:50:59 +0000 https://goodbeer.solutions/?post_type=product&p=1257 DEPTIL PA5

    Agent:

    Peracetic Acid 5% + Hydrogen Peroxide

    Formulation:

    Liquid

    Application Field:

    For chlorine-free disinfection of pumps, piping, tanks, filters, floors, cartridges, dispensers, and circuits.

    Dosage: 0.5-2%

    ]]>         DEPTAL WS caustic cleaner CIP Kersia brewery hygiene https://goodbeer.solutions/en/product/deptal-ws/ Mon, 29 Jan 2024 09:45:20 +0000 https://goodbeer.solutions/?post_type=product&p=1256 DEPTAL WS

     

    liquid caustic cleaner

    ]]>         DEPTACID AMS foam cleaner Kersia brewery hygiene https://goodbeer.solutions/en/product/deptacid-ams/ Mon, 29 Jan 2024 09:23:23 +0000 https://goodbeer.solutions/?post_type=product&p=1254 Properties:
    – Detergent
    – Descaling
    – Wetting
    – Emulsifying
    – Foaming
    – Phosphorus-free

    Application:
    – Cleaning of floors, walls, ceilings, and equipment.
    – Do not apply to concrete.
    – Use with caution on mild steel, galvanized steel.

    Instructions for Use:
    – Concentration: 2 – 5%
    – Temperature: 10 – 50°C
    – Contact time: 15 – 20 minutes
    – Standard usage sequence: Pre-rinse with water

    ]]>         DEPTIL POH – CIP booster – Kersia brewery hygiene https://goodbeer.solutions/en/product/deptil-poh-cip/ Mon, 29 Jan 2024 09:22:26 +0000 https://goodbeer.solutions/?post_type=product&p=1251 CIP cleaning strength booster  
    Contains hydrogen peroxide This product is not intended for disinfection. Application: Cleaning agent for circuits and tanks. Cleaning agent for brewing equipment. Can be added to acid cleaners. Additive for acid cleaners, for alkaline solutions to enhance cleaning power. Before use, consult your technical consultant, who will define the safety protocol to be followed for this mixture. Instructions for use: Concentration: 0.2 to 1% Contact time: 5-30 min Temperature: 20 to 80 °C Standard usage sequence: Application of the DEPTIL POH solution (consult our technical staff) Rinse with potable water
     
    ]]>     The addition must be made slowly and under stirring. Consult your technical consultant beforehand who will define the safety protocol to be followed during the preparation of this mixture. This method must not be used in a confined space, and a vent to the atmosphere is necessary to evacuate the oxygen as it forms.

    CORROSION: DEPTIL POH is minimally corrosive to stainless steels; in aqueous solutions, DEPTIL POH does not cause pitting or crevice corrosion to the stainless steels commonly used in the food industry.

    Control parameters: Sample dose: 5ml Pretreatment: 0.1 N Sodium thiosulfate Indicator: KI Reagent: 20% H2SO4 Titrant factor: f = 0.05±0.01 Concentration in % = titrant ml * f Concentration in g/l = titrant ml * f * 10

    ]]>         Lactic acid 80% E270 for PH control in brewing 25Kg https://goodbeer.solutions/en/product/lactic-acid-80-brewing-ph-e270/ Mon, 29 Jan 2024 09:05:27 +0000 https://goodbeer.solutions/?post_type=product&p=1248

    How to Use: To harness the benefits of Lactic Acid 80%, start by diluting it with water before adding it to your mash or wort. The key is to add it incrementally, testing the pH levels as you go, to achieve the desired acidity without overpowering the brew. This product is highly concentrated, so a little goes a long way. It’s also versatile—use it for sparge water treatment to reduce mineral content and prevent tannin extraction, which can lead to astringent flavors.

    Advantages:

    • Precision in pH Control: Fine-tune the acidity of your mash and wort for optimal enzyme activity and flavor development.
    • Flavor Enhancement: Subtly adjust the tartness and complexity of your beer, perfect for creating distinctive sour beers and enhancing traditional styles.
    • Purity and Quality: Made from natural sources, our Lactic Acid 80% is designed to meet the high standards of craft brewers, ensuring a clean, consistent product with each batch.
    • Efficiency: A small amount can significantly impact, making it a cost-effective solution for pH adjustment and flavor modification.
    • Sustainability: As a naturally derived product, it aligns with sustainable brewing practices, reducing the environmental footprint of your brewery.

    Embrace the craft of brewing with our Lactic Acid 80%—your essential partner in crafting beers that stand out for their quality, flavor, and character. Perfect for brewers who value precision, purity, and sustainability in their craft.

     

    ]]>