Cleaning – GoodBeer Solutions https://goodbeer.solutions/en/ We craft with you Mon, 03 Feb 2025 14:03:09 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://goodbeer.solutions/wp-content/uploads/2024/07/cropped-favicon-32x32.png Cleaning – GoodBeer Solutions https://goodbeer.solutions/en/ 32 32 DEPTACID ONE by Kersia Descaling acid agent https://goodbeer.solutions/en/product/deptacid-one-descaling-agent-kersia/ Thu, 07 Nov 2024 14:19:44 +0000 https://goodbeer.solutions/?post_type=product&p=3138 DEPTACID ONE
DESCALING ACID DETERGENT IN SINGLE PHASE APPLICATION FOR CIRCUITS AND TUNNELS
Physico-chemical characteristics: Appearance Clear liquid Colour Colourless Odour Pungent Pure pH 0.75±0.2 pH value at 10g/l 1.5±0.3 Mass density 1.159±0.01 g/cm³ Freezing point -15 °C Boiling point > 100 °C Solubility in water Soluble in water in all proportions Environmental criteria : chemical oxygen demand (COD) 20 grams of dioxygen per kilogram Nitrogen 6.1 % Phosphorus < 0.1 % Properties : Highly descaling properties Good organic matters removal Suitable for single-phase application Decreases the frequency of use of alkaline Non-foaming Application : Cleaning of CIP systems and tunnels In most cases, it eliminates the alkaline detergent step. The product advantage : Water (+++) / Time (+++) Instructions: Concentration : 0,8 - 3 % Temperature: 20-95 °C Contact time : > 5 mn Standard pattern for use: Rinsing with water Apply DEPTACID ONE by circulation. Final rinsing with drinking water]]> Physico-chemical characteristics:
Appearance Clear liquid
Colour Colourless
Odour Pungent
Pure pH 0.75±0.2
pH value at 10g/l 1.5±0.3
Mass density 1.159±0.01 g/cm³
Freezing point -15 °C
Boiling point > 100 °C
Solubility in water Soluble in water in all proportions
Environmental criteria :
chemical oxygen demand (COD) 20 grams of dioxygen per kilogram
Nitrogen 6.1 %
Phosphorus < 0.1 %
Properties :
Highly descaling properties
Good organic matters removal
Suitable for single-phase application
Decreases the frequency of use of alkaline
Non-foaming
Application :
Cleaning of CIP systems and tunnels
In most cases, it eliminates the alkaline detergent step.
The product advantage : Water (+++) / Time (+++)
Instructions:
Concentration : 0,8 – 3 %
Temperature: 20-95 °C
Contact time : > 5 mn
Standard pattern for use:
Rinsing with water
Apply DEPTACID ONE by circulation.
Final rinsing with drinking water

 

]]> DEPTAL WS caustic cleaner CIP Kersia brewery hygiene https://goodbeer.solutions/en/product/deptal-ws/ Mon, 29 Jan 2024 09:45:20 +0000 https://goodbeer.solutions/?post_type=product&p=1256 DEPTAL WS

 

liquid caustic cleaner

]]> DEPTACID AMS foam cleaner Kersia brewery hygiene https://goodbeer.solutions/en/product/deptacid-ams/ Mon, 29 Jan 2024 09:23:23 +0000 https://goodbeer.solutions/?post_type=product&p=1254 Properties:
– Detergent
– Descaling
– Wetting
– Emulsifying
– Foaming
– Phosphorus-free

Application:
– Cleaning of floors, walls, ceilings, and equipment.
– Do not apply to concrete.
– Use with caution on mild steel, galvanized steel.

Instructions for Use:
– Concentration: 2 – 5%
– Temperature: 10 – 50°C
– Contact time: 15 – 20 minutes
– Standard usage sequence: Pre-rinse with water

]]> DEPTIL POH – CIP booster – Kersia brewery hygiene https://goodbeer.solutions/en/product/deptil-poh-cip/ Mon, 29 Jan 2024 09:22:26 +0000 https://goodbeer.solutions/?post_type=product&p=1251 CIP cleaning strength booster  
Contains hydrogen peroxide This product is not intended for disinfection. Application: Cleaning agent for circuits and tanks. Cleaning agent for brewing equipment. Can be added to acid cleaners. Additive for acid cleaners, for alkaline solutions to enhance cleaning power. Before use, consult your technical consultant, who will define the safety protocol to be followed for this mixture. Instructions for use: Concentration: 0.2 to 1% Contact time: 5-30 min Temperature: 20 to 80 °C Standard usage sequence: Application of the DEPTIL POH solution (consult our technical staff) Rinse with potable water
 
]]> The addition must be made slowly and under stirring. Consult your technical consultant beforehand who will define the safety protocol to be followed during the preparation of this mixture. This method must not be used in a confined space, and a vent to the atmosphere is necessary to evacuate the oxygen as it forms.

CORROSION: DEPTIL POH is minimally corrosive to stainless steels; in aqueous solutions, DEPTIL POH does not cause pitting or crevice corrosion to the stainless steels commonly used in the food industry.

Control parameters: Sample dose: 5ml Pretreatment: 0.1 N Sodium thiosulfate Indicator: KI Reagent: 20% H2SO4 Titrant factor: f = 0.05±0.01 Concentration in % = titrant ml * f Concentration in g/l = titrant ml * f * 10

]]>